View 67-01UTC-EV1W1N-2T_4373051.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet(Preliminary) TOP View LEDs With Black Surface
67-01/UTC-EV1W1N/2T
Features
Fluorescence Type High Luminous Intensity High Efficiency Emission Color:x=0.29,y=0.30 Pb-free. The product itself will remain within RoHS compliant version.
Descriptions
The 67-01 series is available in soft orange, green,blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium.
Applications
OA Equipment Backlighting of Full Color LCD Automotive Equipment Replacement of Conventional Light Bulbs and Fluorescent Lamps
Device Selection Guide
Chip Lens Color Material Emitted Color
InGaN
Pure White
Water Clear
Everlight Electronics Co., Ltd. Device No. :
http://www.everlight.com prepared date:11-Apr-2006
Rev. 1
Page: 1 of 12
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
67-01/UTC-EV1W1N/2T
Package Outline Dimensions
Note: The tolerances unless mentioned is 0.1mm ,Unit = mm
Everlight Electronics Co., Ltd. Device No. :
http://www.everlight.com prepared date:11-Apr-2006
Rev. 1
Page: 2 of 12
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
67-01/UTC-EV1W1N/2T
Absolute Maximum Ratings (Ta=25)
Parameter Reverse Voltage Forward Current Operating Temperature Storage Temperature Electrostatic Discharge(HBM) Power Dissipation Peak Forward Current(Duty 1/10 @ 1KHZ) Soldering Temperature Symbol VR IF Topr Tstg ESD Pd IFP Tsol Rating 5 25 -40 ~ +85 -40~ +100 2000 110 100 Unit V mA V mW mA
Reflow Soldering : 260 for 10 sec. Hand Soldering : 350 for 3 sec.
Electro-Optical Characteristics (Ta=25)
Parameter Luminous Intensity Viewing Angle
Forward Voltage
Symbol IV 21/2 VF
Min. 715 ----2.70
Typ. ----120 -----
Max. 1420 ----3.70
Unit mcd deg V
Condition IF=20mA IF=20mA IF=20mA
Notes:
1.Tolerance of Luminous Intensity 10% 2.Tolerance of Forward Voltage 0.1V
Everlight Electronics Co., Ltd. Device No. :
http://www.everlight.com prepared date:11-Apr-2006
Rev. 1
Page: 3 of 12
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
67-01/UTC-EV1W1N/2T
Bin Range Of Luminous Intensity
Bin V1 V2 W1
Min 715 900 1120
Max 900 1120 1420
Unit mcd
Condition IF=20mA
Bin Range Of Forward Voltage
Group
N
Bin 10 11 12 13 14
Min 2.70 2.90 3.10 3.30 3.50
Max 2.90 3.10 3.30 3.50 3.70
Unit
Condition
V
IF=20mA
Notes:
1.Tolerance of Luminous Intensity 10% 3.Tolerance of Forward Voltage 0.1V
Everlight Electronics Co., Ltd. Device No. :
http://www.everlight.com prepared date:11-Apr-2006
Rev. 1
Page: 4 of 12
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
67-01/UTC-EV1W1N/2T
Group Bin Code
CIE_x 0.280 0.264
CIE_y 0.248 0.267 0.305 0.276 0.295 0.305
Bin Code
CIE_x 0.311 0.307
CIE_y 0.294 0.315 0.339 0.318 0.315 0.33 0.36 0.339
A0
0.283 0.296 0.287 0.283
B6
0.330 0.330 0.307 0.304
E
B3 0.304 0.307 0.296 0.287 B5 0.307 0.311 0.315 0.294 0.330 0.315 0.276 0.295
B4 0.33 0.33
*The C.I.E. 1931 chromaticity diagram ( Tolerance 0.01).
Everlight Electronics Co., Ltd. Device No. :
http://www.everlight.com prepared date:11-Apr-2006
Rev. 1
Page: 5 of 12
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
67-01/UTC-EV1W1N/2T
CIE Chromaticity Diagram
0.36 0.35 0.34 0.33 0.32 0.31
B4 B3 B5 B6
y
0.30 0.29 0.28 0.27 0.26 0.25 0.24 0.26 0.28
A0
0.30
0.32
x
. *The C.I.E. 1931 chromaticity diagram ( Tolerance 0.01).
Everlight Electronics Co., Ltd. Device No. :
http://www.everlight.com prepared date:11-Apr-2006
Rev. 1
Page: 6 of 12
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
67-01/UTC-EV1W1N/2T
Typical Electro-Optical Characteristics Curves
Everlight Electronics Co., Ltd. Device No. :
http://www.everlight.com prepared date:11-Apr-2006
Rev. 1
Page: 7 of 12
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
67-01/UTC-EV1W1N/2T
Label explanation
CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is 0.1mm ,Unit = mm
Everlight Electronics Co., Ltd. Device No. :
http://www.everlight.com prepared date:11-Apr-2006
Rev. 1
Page: 8 of 12
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
67-01/UTC-EV1W1N/2T
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel.
Note: The tolerances unless mentioned is 0.1mm Unit = mm
Moisture Resistant Packaging
Label
Aluminum moisture-proof bag
Desiccant
Label
Everlight Electronics Co., Ltd. Device No. :
http://www.everlight.com prepared date:11-Apr-2006
Rev. 1
Page: 9 of 12
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
67-01/UTC-EV1W1N/2T
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10%
No. 1
Items Reflow Soldering
Test Condition Temp. : 2605 5sec. H : +100 15min 5 min L : -40 15min H : +100 5min 10 sec L : -10 5min Temp. : 100 Temp. : -40 IF = 20 mA / 25 85/85%RH
Test Sample Ac/Re Hours/Cycles Size 6 min 22 PCS. 0/1
2
Temperature Cycle
300 Cycles
22 PCS.
0/1
3
Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity
300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs.
22 PCS.
0/1
4 5 6 7
22 PCS. 22 PCS. 22 PCS. 22 PCS.
0/1 0/1 0/1 0/1
Everlight Electronics Co., Ltd. Device No. :
http://www.everlight.com prepared date:11-Apr-2006
Rev. 1
Page: 10 of 12
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
67-01/UTC-EV1W1N/2T
Precautions For Use
1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.
Everlight Electronics Co., Ltd. Device No. :
http://www.everlight.com prepared date:11-Apr-2006
Rev. 1
Page: 11 of 12
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
67-01/UTC-EV1W1N/2T
5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com
Everlight Electronics Co., Ltd. Device No. :
http://www.everlight.com prepared date:11-Apr-2006
Rev. 1
Page: 12 of 12
Prepared by: Teresa Lee

▲Up To Search▲

Price & Availability of 67-01UTC-EV1W1N-2T

	To Download 67-01UTC-EV1W1N-2T Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .